Screeding in Bolton

What this work involves

Our team handles screeding from preparation through to the finished surface. Screeding is the layer laid over a structural floor to bring it to a level, flat surface ready for a floor covering. Work covers checking the base, setting levels, mixing and laying the screed, compacting and finishing the surface, and allowing it to cure before foot traffic or flooring goes down. Get a level, flat floor base ready for tiling, timber or vinyl. Every job starts with a look at the surface you actually have, rather than an assumption about it.

Screeding in Bolton

Bolton is within our working area for screeding. Surrounding parts of Greater Manchester are covered on the same terms.

What is included

Work of this type usually covers:

• Sand and cement screed
• Bonded screed to a prepared base
• Unbonded screed over a membrane
• Floating screed
• Patch repairs to damaged screed
• Levelling uneven floors
• Finishing ready for floor coverings

Typical jobs

Typical jobs we are asked about in Bolton:

• Levelling an uneven ground floor
• Screeding a new extension
• Preparing a floor for tiling
• Repairing a failed screed
• Raising the floor to a finished height
• Sand and cement screed
• Bonded screed to a prepared base
• Unbonded screed over a membrane

Preparation and process

Most of the quality of a finished surface comes from what happens before the final coat.

1. Check the base and the levels
2. Prepare and prime the surface
3. Set the datum and the bays
4. Mix and lay the screed
5. Compact and finish the surface
6. Allow to cure before loading

Materials used depend on the substrate and finish: Sand and cement screed, Floor screed mix, Bonding agents and primer and Edge insulation and membrane.

Suitable properties

Property types this suits around Bolton:

• Ground floor extension
• New build
• Renovation project
• Flat
• Commercial unit
• Garage conversion

Problems this solves

Issues we are usually called out for:

• Uneven or undulating floors
• Cracking in old screed
• Hollow or debonded areas
• High spots under floor coverings
• Damp coming through the base
• Insufficient curing before flooring

Local considerations

As a town, Bolton has a mix of building ages, and older walls behave differently to newer plasterboard.

Related services

Related work we also carry out:

• Plastering in Bolton
• Rendering in Bolton
• Skimming in Bolton

Common questions

Do you cover Bolton?

Yes. Bolton and the surrounding Greater Manchester area is within our working area for screeding. We confirm timing when you enquire.

How much does screeding cost?

We do not publish a fixed price, because cost depends on the size of the area, the condition of the existing surface, access and the finish you want. We give a written quote after assessing the job rather than an estimate that changes later.

Curing time before flooring?

This depends on the property, so we would rather answer it properly once we have seen the surface than give a general answer that may not apply to your job.

Is there anything you do not cover?

Underfloor heating installation, structural floor replacement and damp-proof membrane installation are outside this scope.

Screed thickness?

This depends on the property, so we would rather answer it properly once we have seen the surface than give a general answer that may not apply to your job.

How long does the work take?

It depends on the area and how much preparation is needed, and drying time between coats cannot be shortened safely. We give a realistic timescale with the quote instead of a generic figure.

Do I need to move out or clear the room?

For most jobs the room needs to be clear of furniture and floor coverings protected. We will tell you exactly what to move before we arrive.

How we work

We would rather turn work down than promise a finish a surface cannot hold. Everything is quoted in writing after an assessment.

What to expect

We work the same way for every enquiry — assess, explain, quote, then carry out the work to the agreed standard and timescale. The quote covers the preparation, the materials and the finish, so you know what the price includes.

What good work looks like

The difference between an acceptable screeding job and a good one is mostly in what you do not see. Removing loose material, checking for moisture, bonding the substrate, building up coats in the right order, and allowing proper drying time between stages — these are the steps that decide whether the finish stays sound or develops problems months later.

Choosing the right approach

There is rarely a single right way to approach a screeding job. The existing substrate, the age of the building, the condition of what is already there, and what the finished surface needs to do all feed into the decision. Sometimes the existing surface can be worked with; sometimes it needs to come off and start again. We explain the options and their trade-offs so the choice is yours, not ours.

Service coverage

We cover Bolton and nearby parts of Greater Manchester. For anything further out, get in touch and we will be straight with you about whether we can help.

Get a quote

Tell us what needs doing in Bolton and send photos if you have them. We will come back with a written quote and a realistic timescale — no obligation.